Using The "Bravia" Sync Function - Sony HT-S200F Manuel D'instructions

Note
If the TV is not compatible with Audio
Return Channel, the optical digital cable
(supplied) needs to be connected (refer to
the supplied Startup Guide).
One-Touch Play Function
When you play content on a device (Blu-
ray Disc player, "PlayStation
connected to the TV, the system and TV
are turned on automatically, the input of
the system is switched to "TV" input,
and sound is output from the speakers
of the system.
Notes
• If the TV sound was output from the
speakers of the TV the previous time you
watched the TV, the system does not turn
on and the sound and picture are output
from the TV even if device content is
played.
• Depending on the TV, the beginning part
of content being played may not play
correctly.
28
US
Using the "BRAVIA" Sync
Function
In addition to the Control for HDMI
function, you can also use the following
functions on devices compatible with
the "BRAVIA" sync function.
• Sound mode/Scene Select function
4," etc.)
• Home Theatre Control
®
Note
These functions are proprietary functions
of Sony. This function cannot operate with
products other than those manufactured
by Sony.
Sound mode/Scene Select
Function
The sound mode of the system is
automatically switched according to the
setting of the TV's Scene Select function
or sound mode. For details, refer to the
operating instructions of your TV.
Set the sound mode to "AUTO SOUND"
(page 22).
Home Theatre Control
Function
When using a TV compatible with the
Home Theatre Control function, setting
the system, setting the sound mode
settings, input switching, etc. can be
done without switching the TV input.
This function can be used when the TV is
connected to the Internet. For details,
refer to the operating instructions of
your TV.