Install The Brushes - Nilfisk Advance Hydro-Retriever 2800 Mode D'emploi

INSTALL THE BRUSHES (DISC SYSTEM)
1 Make sure the Key Switch (33) is off (O). To access the brushes, swing both side skirt assemblies open. Note: The skirts are held in place by a large
cotter pin on each side, remove the pins and swing the skirt assemblies out of the way.
2 To mount the brushes (or pad holders) align the lugs on the brush with the holes on the mounting plate and turn to lock in place (turn outside edge of brush
towards front of machine).
56505771 - Magna Grit 46
56505772 - Dyna Grit 80
56505773 - AgLite Grit 500
56505774 – Prolene
56505775 - ProLite
56505776 - Union Mix
56505777 - MidGrit 240
56505778 - MidLite Grit 180
DISC BRUSH APPLICATION GUIDE (SUGGESTION ONLY)
Application
Stripping:
Concrete
Terrazo
Ceramic/Quarry tile
Vinyl tile
General Scrubbing:
Concrete
Terrazo
Ceramic/Quarry tile
Marble
Vinyl tile
Raised-rubber tile
Polishing:
Raised Disc Tile
Marble
Vinyl tile
INSTALL THE BRUSHES (CYLINDRICAL SYSTEM)
1 Make sure the Key Switch (33) is off (O). To access the brushes, swing both side skirt assemblies open. Note: The skirts are held in place by a large
cotter pin on each side, remove the pins and swing the skirt assemblies out of the way. Loosen the black knobs (one on each side) on top of the idler
assemblies and remove the idler assemblies. Slide the brush into the housing, lift slightly, push and turn until it seats. Re-install the idler assemblies,
close the skirt assemblies and secure with cotter pins.
56412046 – Polypropylene, 28"
56412191 - Soft Nylon, 28"
56412192 - Stiff Nylon, 28"
56412193 - 180 Grit, 28"
56412194 - 80 Grit, 28"
56412195 - 46 Grit, 28"
CYLINDRICAL BRUSH APPLICATION GUIDE (SUGGESTION ONLY)
Application
Stripping:
Concrete
Terrazo
Ceramic/Quarry tile
Vinyl tile
General Scrubbing:
Concrete
Terrazo
Ceramic/Quarry tile
Marble
Vinyl tile
Raised-rubber tile
30 - FORM NO. 56041451 - Hydro-Retriever
46 80 180
Grit Grit Grit
X X
X X
X
X
X X X
X
X
X
56407475 – Polypropylene, 32"
56407473 - Soft Nylon, 32"
56407474 - Stiff Nylon, 32"
56407476 - 180 Grit, 32"
56407477 - 80 Grit, 32"
56407478 - 46 Grit, 32"
46 80 180 Polypro-
Grit Grit Grit pylene
X X
X X
X
X
X X X
X
X
X
X
X
™ 2800 / BR 700
240 500
Grit Grit Prolene Prolite
X X
X X X
X X X
X
X X
X
Stiff Soft
Nylon Nylon
X X
X X X
X X X
X X
X X X
X
revised 1/02
Union
Mix
X
X
X
X
X