Troubleshooting - Emerson LOFT CF765BQ01 Mode D'emploi

FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE
TROUBLESHOOTING YOUR FAN.
TROUBLE
1. Fan will not start. 1. Fuse or circuit breaker blown.
2. Loose power line connections to the fan
or loose switch wire connections in the
switch housing.
3. Reverse switch in neutral position.
2. Fan sounds
1. Blades not attached to fan.
noisy.
2. Loose screws in motor housing.
3. Screws securing fan blade assemblies to
motor hub are loose.
3. Fan wobbles
1. Set screws in motor coupler are loose.
excessively.
2. Set screw in hanger ball/downrod assembly
is loose.
3. Screws securing fan blade assemblies to
motor are loose.
4. Hanger bracket and/or ceiling outlet box is
not securely fastened.
5. Fan blades out of balance.

12. Troubleshooting

WARNING
!
PROBABLE CAUSE
19
SUGGESTED REMEDY
1. Check main and branch circuit fuses or circuit breakers.
WARNING
!
Make sure main power is turned OFF.
2. Check line power connections to fan and switch wire
connections in the switch housing.
3. Make sure reverse switch position is all the way to one
side.
1. Attach blades to fan before operating.
2. Check to make sure all screws in motor housing are snug
(not over-tight).
3. Check to make sure the screws which attach the fan
blade assemblies to the motor hub are tight.
WARNING
!
Make sure main power is turned OFF.
1. Tighten both set screws securely in the motor coupler.
2. Tighten the set screw in the hanger ball / downrod
assembly.
3. Check to be sure screws which attach the fan
blade assemblies to the motor are tight.
4. Tighten the hanger bracket screws to the outlet box,
and/or secure outlet box.
5. Interchanging an adjacent (side-by-side) blade pair can
redistribute the weight and result in smoother operation.
Please contact 1-800-654-3545 for further assistance
emersonfans.com
U.L. Model No.: CF765-1