Emerson LOFT CF765BQ01 Mode D'emploi page 14

WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.
6.2
Lift the Ceiling Cover up to the Threaded Studs and
turn until Studs protrude through the holes in the
Ceiling Cover (Figure 20).
Secure the Ceiling Cover in place by sliding
Lockwashers over the Threaded Studs and installing
the two Knurled Knobs (supplied). (Figure 20).
Tighten the Knurled Knobs securely until the Ceiling
Cover fits snugly against the ceiling and the hole in the
Ceiling Cover is clear of the Downrod.
HANGER
BRACKET
THREADED
STUDS (2)
Figure 19
CEILING COVER
THREADED STUDS (2)
#8 LOCKWASHERS (2)
KNURLED KNOBS (2)
Figure 20
14
U.L. Model No.: CF765-1