Medion LIFE P62004 Mode D'emploi page 69

REC – Set recording format
Turn the PUSH/SEL multipurpose control to set the format for recording
or (WindowsMedia-Audio) files on SD/MMC or USB media.
MP3 WMA
TELVOL – set telephone volume
Turn the PUSH/SEL multipurpose control to set the default volume for a
telephone call.
DSP – Set equalizer
You can add a sound setting for the sound.
Turn the PUSH/SEL multipurpose control to select between the
, ,
ROCK POP FLAT
In the setting all equalizer settings are set to zero.
FLAT
If you want to select a different setting to the default
no longer control the treble and bass separately (see "Sound settings
with PUSH/SEL" on page 19).
LOUD – Switch loudness function on/off
Turn the PUSH/SEL multipurpose control to switch the loudness function
on ( EON ON ) or off (
The loudness function increases the bass sounds at low volume.
LOC – Set reception sensitivity (only in radio mode)
Turn the PUSH/SEL multipurpose control to dampen the reception
sensitivity at the antenna input (
).
OFF
If you only want to receive local stations when locating stations if the
function is switched on it is active for FM stations. To prevent strong
dampening of the antenna signal after the station search, reset normal
sensitivity (
LOC OFF
STEREO
Set stereo or mono reception (only in FM radio mode)
Most FM stations transmit in stereo. The display will show
reception. If the reception conditions are unfavourable it may be necessary
to set mono to improve the reception quality.
Turn the PUSH/SEL multipurpose control to either set stereo (
mono ( ) reception.
MONO
MD 82309
and settings.
NONE
EON OFF ).
LOC ON
).
) or to set it to normal sensitivity (
CLAS ,
DSP NONE you can
LOC
for stereo
) or
STEREO
UK-21
UK