General Functions; Switching On/Off And Mute; Sound Settings With Push/Sel - Medion LIFE P62004 Mode D'emploi

General functions

Do not switch the radio on for longer periods of time if the engine is
not running. This could discharge the car battery and the car would
no longer start.

Switching on/off and mute

Hold down the PWR/MUTE button for a few seconds to switch the device
on and off.
The device also switches on if you press any button except the OPEN open
button.
If you press the PWR/MUTE button briefly you only switch the sound on
and off ("MUTE" = switch to mute).
Press PWR/MUTE again to turn the sound back on.

Sound settings with PUSH/SEL

Volume
The PUSH/SEL multipurpose control has the basic function (without
pressing the button) of controlling the volume (VOL+/VOL–).
Turn the wheel to the left or right to turn the volume up or down.
Always set the volume such that you can still clearly hear the sirens of
emergency vehicles!
Bass/treble/balance/fader
Press the PUSH/SEL multipurpose control to display the current settings
for bass ( ), treble (
BAS
Turn the PUSH/SEL multipurpose control to modify the settings.
The bass and treble can not be set if the equalizer
modified (refer to "Equalizer" below).
MD 82309
), balance ( ) and fader (
TRE BAL
).
FAD
setting was
DSP NONE
UK-19
UK