Change Codes - Siemens Codelock K44 Duo Manuel D'installation Et D'utilisation

14

Change codes

1� Enter A22.
2� Enter the current code. If it is a 4-digit code,
enter A after the last digit.
3� Enter the new code using four or six digits.
4� Enter the new code once again.
5� Choose whether or not the code should be disa-
bled from a time clock.
0 = no time control
1 = code disabled from time clock 1
2 = code disabled from time clock 2
6� Choose which relay output to control.
0 = both relay outputs
1 = relay output 1
2 = relay output 2
7� Change the next code by continuing from step 2
or press B to leave code program
K44 Duo Installation & User manual