Delay On/Off; Erase The Memory - Siemens Codelock K44 Duo Manuel D'installation Et D'utilisation

20

Delay on/off

When this function is activated, the following hap-
pens: If a code is programmed to open two doors,
lock relay 2 is not activated until door 1 has been
opened and closed.
If door 2 is opened with the exit button, door 2 has to
be opened and closed before door 1 can be opened.
Note that door contacts must be connected and that
Door control must be activated for this to work.
This is how to activate Delay:
1� Enter A80.
2� Enter 1.
To deactivate Delay, press 0 in step 2 instead.

Erase the memory

This is how to erase all programmed information
(including the password):
1� Press B and enter the current password.
2� Press SW1 on K44 Duo's circuit board.
3� Enter 112186.
4� Enter 112186 once again. The memory is now
erased and K44 Duo goes back to the factory
settings.
K44 Duo Installation & User manual