Duress Or Alert - Siemens Codelock K44 Duo Manuel D'installation Et D'utilisation

K44 Duo Installation & User manual

Duress or Alert

The K44 Duo allows for either using duress or alert.
The same command is used for different function.
Duress
With the Duress function activated, a user can enter
a special code if he or she is forced to open the door
under threat. It is important to have a plan for what
action to take when a duress code is entered.
NoTE! If Duress is activated, make sure you have not
programmed codes with consecutive digits.
Code 1234 must not exist with codes 1235 and
1233. Code 5679 must not exist with codes
5670 and 5678.
The Enter duress code section describes how a user
should enter the duress code.
Alert
When K44 Duo is delivered, the alarm output is set
to be activated if the door is open too long or if the
door is forced open.
Note that door contacts must be connected and that
Door monitoring must be activated for this to work.
17