Setting The Cooktop; Switching The Cooktop On And Off; Hibernate Mode; Setting A Cooking Position - Thermador MASTERPIECE Serie Guide D'utilisation Et D'entretien

Setting the cooktop

In this chapter you will learn how to adjust the cooking
zones. In the setting chart you will find heat levels and
cooking times for various dishes.

Switching the cooktop on and off

Use the main switch to switch the cooktop on and off.
To switch on: touch the
the main switch lights up. After a short activation time,
the cooktop is ready for operation.
To switch off: touch the
display switches off. All cooking positions are switched
off. Hibernate mode is activated. See section Hibernate
mode.
The heat indicator remains lit until the cooking positions
have cooled down sufficiently.
Note: The cooktop switches off automatically if all
cooking positions have been switched off for more than
60 seconds and you do not make any settings on the
touch display.

Hibernate mode

As soon as you switch off the cooktop, Hibernate mode
is activated for a set duration. The lamp above the main
switch flashes. Only after this duration has passed the
cooktop switches off completely. During Hibernate mode,
you can switch the appliance on again using the main
switch. The appliance is immediately ready for use.
Note: To find out how to change the duration of the
Hibernate mode, see section Settings.
symbol. The indicator above
#
symbol. The indicator in the
#

Setting a cooking position

Use the scroll function to set the desired power level.
Power level 1.0 = Lowest power
Power level 9.0 = Highest power
Each power level has an intermediate level. This is
identified with x.5.
Note: To find out how to deactivate the intermediate
levels, see section Options menu.
Setting the power level
The cooktop must be switched on.
Place cookware on the cooking surface.
1.
Touch the cooking position symbol. The power setting
2.
screen shows up in the display.
In the next 4 seconds, slide your finger left and set the
3.
desired power level.
Switching off the cooking position
In the power setting screen, slide your finger to 0.0. The
cooking position switches off and appears as a detected
cooking position after approx. 4 seconds.
11