Tips - Thermador MASTERPIECE Serie Guide D'utilisation Et D'entretien

Warnings
Warnings are displayed if an error occurs within the
appliance which means you can only continue to use the
cooktop with limitations. Follow the instructions on the
display and touch CONTINUE to close the warning.
Note: For some warnings, an error code is displayed
(e.g.: [C3])
If necessary, specify the error code when you contact the
after-sales service.

Tips

Problem
The size or shape of the cookware is not
displayed correctly on the touch display.
The boost function has been deactivated
or cannot be activated.
An audible signal sounds if there is an
object on the touch display.
The cookware is not detected.
The cooktop switches off automatically.
The cooking position cannot be adjusted. Only 2 cooking positions can be in operation on each side of the cooktop.
The cooking position settings are not
transferred when the cookware is moved.
The cooktop responds unusually or can
no longer be operated correctly.
20
Error messages
Error messages are displayed if errors or malfunctions
occur within the appliance with the result that you cannot
continue to use the cooktop.
Disconnect the appliance from the electric supply by
switching the circuit breaker to the off position for 15
seconds. If the display appears again, call the after-sales
service.
Note: For some error messages, an error code is
displayed (e.g.: [C0])
If necessary, specify the error code when you contact the
after-sales service.
Solution
Differences in how the cookware is shown on the display are normal and
do not adversely affect the correct operation of the cooktop (particularly
small cookware is shown as a round cooking position).
Two cooking positions that are quite close to each other may be dis-
played as one cooking position. Redistribute the cookware.
Never place the cookware outside of the usable cooking surface.
You can only activate the boost function once on the right and left-hand
halves of the cooktop. If a second cooking position is switched on or is
already in operation, the boost function will not be available or is deacti-
vated and the cooking position returns to power level 9.0.
Remove the object and acknowledge the indicator on the display. You
can now reset the cooktop.
The cookware is outside the appropriate size. Sizes with a diameter of
3" (80mm) to 13¼" (340mm) are suitable.
There may be liquid under the cookware. Ensure that the base of the
cookware is dry.
The cookware may not be suitable for induction cooking.
If no cooking position is in operation on the cooktop and you do not
change the settings for a prolonged period of time, the cooktop will auto-
matically switch off.
An item of cookware in the centre of the cooktop occupies one cooking
position on each side of the cooktop. You can only set one other cooking
position for each side of the cooktop.
The cookware may not be suitable for induction cooking.
Move the cooking container more slowly over the cooktop or use the
transfer function.
Disconnect the appliance from the electric supply by switching the circuit
breaker to the off position for 15 seconds.