GUTMANN CLARO Notice De Montage page 19

2. Determine the installation direction of
the hood. If the LEDs are on the right
hand side from the user's perspec-
tive, the flap opens in the user's di-
rection.
3. Determine the position of the extrac-
tor hood centrally over the hob (use a
plumb line for help) and mark the centre
point of the hood on the ceiling. Mark
the fastening holes from the
5. Before hanging the hood body (A),
remove the filter insert (E) by removing
the screw connection (F).
4 Stück
M5 x 12
en
19