Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
> Before Start
> Part Names
Rear Panel
1. ANTENNA FM 75Ω jack: Connect the supplied antenna.
2. ANALOG IN jacks: Input audio signals from a TV, for example, with an analog audio
cable.
3. DIGITAL IN OPTICAL jack: Input digital audio signals from a TV, for example, with a digital
optical cable.
4. Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH enabled
device. The diagram shows the movable range for the wireless antenna. Do not try to
force it beyond this range otherwise you may break it.
5. Power cord
6. USB port: A USB storage device is connected so that music files stored in it can be
played. You can also supply power (maximum 5V/1A) to USB devices with a USB cable.
7. NETWORK port: Connect to the network with an Ethernet cable.
8. HDMI OUT jack: Connect a HDMI cable to transfer video signals and audio signals to a
TV.
9. HDMI IN jacks: Input video signals and audio signals with a HDMI cable connected to an
AV component.
4
> Install
> Setup
> Playback
Supplementary information | Firmware Update | Others
90°
E
N
180°
Publicité
Chapitres
Table des Matières
Dépannage
