Masquer les pouces Voir aussi pour FS-W40:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 61
> Before Start
> Part Names
1. Registration of wireless Speakers
Pair the speakers and sound system controller. It takes
about 30 seconds to detect the speakers. When all the
speakers you will use have been detected, select "Save" to
save the pairing information.
Scan
The follwoing speakers were detected.
Front Left
: Yes
Front Right
: Yes
Surround Left
: No
Surround Right : No
Subwoofer
: No
Ensure all speakers are connected to the power supply.
Save
Retry
If there are speakers that cannot be detected, make sure
that the speaker's power cord is properly plugged into the
wall outlet, then select "Retry".

2. Easy Setup

Adjust the audio output of the speakers. By just selecting
the positions of speakers as you see them from the listening
position, you can automatically and easily set the output
levels, etc., for each of the speakers.
Easy Setup
Which speaker is closest to your listening
position?
Front Left or Front Right?
Same Distance
Front Left
Front Right
0 You can also make more advanced settings for output
levels and distances from the listening position for each
of the speakers. (
P15)
> Install
> Setup
3. Network Connection
Set up Wi-Fi connection with an access point such as a
wireless LAN router. There are the following two methods of
connecting by Wi-Fi:
"Enter Password": Enter the password (or key) of the
access point to connect.
"Push Button": If the access point has an automatic
connection button, you can connect without entering a
password.
0 If the SSID of the access point is not displayed, then in
the screen listing the SSIDs, select "Other..." with the
button on the remote controller and press ENTER, then
follow the on-screen instructions.
Wi-Fi Setup
When finished, select the "OK" key.
Keyboard input: To switch between upper and lower case,
select "A/a" on the screen and press ENTER. To select
whether to mask the password with "*" or display it in plain
text, press +Fav on the remote controller. Pressing CLEAR
will delete all the input characters.
Privacy policy: A confirmation screen asking you to agree
to the privacy policy is displayed during network setting.
Select "Yes" and press ENTER to indicate agreement.
ENTER
Next
> Playback
Password
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z
1
2
3
4
5
6
7
8
9
0
-
^
\
,
.
/
;
:
@
[
]
̺
A/a
OK
All Erase
+Fav
Hide/Show
A/a
Supplementary information | Firmware Update | Others
E
N
13

Publicité

Table des Matières
loading

Table des Matières