Install; Install The Wireless Satellite Speakers - Pioneer FS-W40 Mode D'emploi

> Before Start > Part Names

1. Install the Wireless Satellite Speakers

Install

1
8
> Install > Setup
2
> Playback
Supplementary information | Firmware Update | Others
First install the speakers and connect their power cords. On
the rear of the speakers you will see "L" or "R" on the label.
Place the speaker with "L" at the left of the listening position.
Place the speaker with "R" to the right of the listening position.
The sound system controller and the speakers are connected
wirelessly. Setup inside within a maximum 9 m (30 ft.) square.
The optimum is to put the speakers at ear height, at an even
distance from the listening position.
When also installing the wireless subwoofer and wireless
satellite speakers (sold separately), make sure you put
them in place and connect their power cords. Refer to the
instruction manuals for the other equipment for the location
and power connections for them.
＊1
＊ 1: The optimum is between 22 e and 30 e.
E
N