Connect The Av Components - Pioneer FS-W40 Mode D'emploi

> Before Start > Part Names

3. Connect the AV Components

1
HDM I OUT
a HDMI cable
10
> Install
Use HDMI cables to connect AV components. With
connection to an AV component that conforms with the CEC
(Consumer Electronics Control) standard, you can use
features such as the HDMI CEC feature that links with the
input selector, and the HDMI Standby Through feature
which allows you to play video and audio from AV
components on the TV even when this unit is in standby
mode. (
0 To play 4K or 1080p video, use the high speed HDMI
cable.
Setup
0 Settings are required to use the HDMI CEC and HDMI
Standby Through features. Make settings after all
connections are complete. Settings are made in the
System Setup (
a
on the remote controller. In the System Setup menu,
enable both "Hardware" - "HDMI CEC" (
"HDMI Standby Through" (
0 To enjoy digital surround sound including Dolby Digital,
audio output should be set to "Bitstream output" on the
e.g. BD
connected Blu-ray Disc player or other device.
> Setup > Playback
P58)
P14) menu displayed by pressing
P17) and
P18).
Supplementary information | Firmware Update | Others
BD/DVD
Cable/Satellite Streaming
set-top box media player
E
N
GAME