Warning And Safety Instructions - Miele Professional A 602 Mode D'emploi

en - Warning and Safety instructions
To avoid the risk of accidents and damage to this module please
read these instructions carefully before using it for the first time.
Keep these instructions in a safe place where they are accessible
to users at all times.
 Please also read the operating instructions for your washer-
disinfector and pay particular attention to the Warning and Safety
instructions.

This module is only for use in the areas of application as defined in
the operating instructions. Components such as the nozzles must
only be replaced with Miele accessories or original parts. Any other
application, modification or change is unauthorised and could be
dangerous.
Miele cannot be held liable for damage caused by unauthorised use
or incorrect operation.

The load carrier is set up by Miele during the commissioning
process.

New load carriers must be cleaned in the washer-disinfector
without a load prior to first use.

Inspect all mobile units, modules and inserts daily as described in
the "Maintenance" section in the operating instructions for the
washer-disinfector.

Any hollow items that have become disconnected from their
injector nozzles, adapters or holders during processing must be
re-processed.
Miele cannot be held liable for damage caused by non-compliance
with these Warning and Safety Instructions.
29