Areas Of Application; Before Loading The Machine And Before Starting A Programme; Loading; Manual Pre-Cleaning - Miele Professional A 602 Mode D'emploi

en - Areas of application
Manual pre-
cleaning
Arranging and
connecting shaf‐
ted instruments
30
Before loading the machine and before starting a
programme
– Check that the filter plate in the water inlet tube is in place and
clean.
For validation purposes please make sure that you follow the
loading instructions given on the template.
 Make sure that all screw connectors are fitted with injector
nozzles, adapters, irrigation sleeves or blind stoppers to ensure
that all rinsing fittings in use are supplied with sufficient standar‐
dised pressure.
Damaged fittings must not be used.
Damaged silicone tubes must be replaced with new ones before
the module is used again.
Rinsing positions not in use do not have to be fitted with blind
stoppers.

Loading

 On-site pre-treatment and preparation for machine reprocessing
must be carried out according to the manufacturer's instructions.
Instruments, particularly the distal functional ends, must be
optically clean before they are loaded into the A 602 module.
Push the instrument into the holder from above.
