Before Using The Time Recorder; Attached Accessories; Location Of Name; Print Position On Time Card - Lathem 5000E Plus Guide De L'utilisateur

2.BEFORE USING THE TIME RECORDER

Package Contents
Unpack the Time Recorder and check its contents to ensure that the Time
Recorder unit and all accessories as shown below are included.

Attached Accessories

User's Manual

Location of Name

<Front view>
Display
Push bar
<Cover off>
Display
Control buttons
1
Keys
................2 pcs.
Key hole
Cover

Print Position on Time Card

Print head
Ribbon cassette
Ribbon Cassette
................1 pcs.
The ribbon casette is
installed at the factory.
<Back view>
<Print position adjuster>
Wall-Mount Fittings
Screw
.......4 pcs.
Template
....1 sheet.
Wall-mount holes
AC power plug
(115VAC model)
Print position from the
card edge is adjustable
by pressing and sliding
the print position
button located on the
right outside bottom of
the Time Recorder.
Maximum distance
from edge of form to
print is approximately
1 3/16"(30mm).
2