Setting The Time Table Program - Lathem 5000E Plus Guide De L'utilisateur

18. SETTING THE TIME TABLE PROGRAM

The time table program function allows special mark "*" printing, an External Time Signal
and a Built-in Buzzer. These functions can be programmed for each day of the week and
each time period.
Example 1: The time table program is explained using the following example.
0:00
Monday Special mark "*"
to Friday
The following is time table based on the case above.
Program No.
01
02
• Special mark "*" isn't printed for the time period with no program setting.
• Up to 48 programs can be set (Program No. 1 through No. 48).
Print example:
1
Press the [SELECT] button and
position the "
TABLE PROGRAM" mark.
At that moment, the flashing digit
indicates "Program No.".
(The flashing means it can be changed.)
Program No.
Day of the week
SELECT
Day of the week
1. Monday only
2. Tuesday only
3. Wednesday only
4. Thursday only
5. Friday only
31
9:00
Special mark "* " ON
OFF
Day of the week
Mon. - Fri.
Mon. - Fri.
JAN 31 8:30
JAN 31 10:00
" over the "TIME
Action
TIME TABLE
PROGRAM
CHANGE SET
Day of the week
6. Saturday only
7. Sunday only
8. Monday to Friday
9. Monday to Saturday
10. Every day
17:30
Special mark "*"
Time Special mark "*"
9:00
17:30
Special mark
*
2
Setting program No. 1
(1) Set the "Day of the week".
Press the [SET] button. At that moment,
the flashing changes from the "Program
No." to the "Day of the week".
In case of example, press the[CHANGE]
button to set at "8". And then press the
[SET] button. At that moment, the
flashing changes from the "Day of the
week" to the "Action".
SELECT
0:00
OFF
ON
OFF
TIME TABLE
PROGRAM
CHANGE SET
30