Lathem 5000E Plus Guide De L'utilisateur page 36

2
(2)Set the "Action".
Press the [CHANGE] button to set at
"1". And then press the [SET] button.
SELECT
At that moment, the display changes
to the following figure.
SU
BUZZ
SIGNAL
SELECT
Selected Action
Action
1. Special mark "*" ON
2. Special mark "*" OFF
3. Ext. Signal ON
4. Built-in Buzzer ON
• The "Ext. Signal" and the "Built-in
Buzzer" are available only when
"Optional Board" is connected to the
time recorder.
31
TIME TABLE
PROGRAM
CHANGE SET
Selected
Day of the week
MO TU WE TH FR SA
EXT. *OFF *ON
TIME TABLE
PROGRAM
CHANGE SET
(3)Set the "Hour".
In case of example, press the
[CHANGE] button to set at "9". And
then press the [SET] button.
Hour
SU MO TU WE
BUZZ EXT. *OFF
SIGNAL
SELECT CHANGE
At that moment, the flashing changes
from the "Hour" to the "Minute".
SU MO TU WE
BUZZ EXT. *OFF
SIGNAL
SELECT CHANGE
(4)Set the "Minute".
In case of example, press the
[CHANGE] button to set at "00". And
then press the [SET] button.
SU MO TU WE
BUZZ EXT. *OFF
SIGNAL
SELECT CHANGE
TH FR SA
*ON
TIME TABLE
PROGRAM
SET
Minute
TH FR SA
*ON
TIME TABLE
PROGRAM
SET
TH FR SA
*ON
TIME TABLE
PROGRAM
SET
32