Lathem 5000E Plus Guide De L'utilisateur page 37

3
Setting program No. 2
Press the [CHANGE] button twice. At
that moment, the display changes to
the following figure.
SELECT
4
After you finish setting the time table
program, press the [SET] button once
again.
Now the time table program setting
has been completed. Replace
the cover and lock.
Important: If you do not complete Step
4, the Time Recorder will not print.
Example 2: The time table program is explained using the following example.
0:00
Monday
to Saturday
Program No.
01
02
03
04
• Up to 48 programs can be set (Program No. 1 through No. 48).
33
TIME TABLE
PROGRAM
CHANGE SET
9:00
Ext. Signal
&
Built-in Buzzer
Day of the week
Mon. - Sat.
Mon. - Sat.
Mon. - Sat.
Mon. - Sat.
Make settings for Program No.2 in the
same manner as for Program No.1, as
illustrated in the following figure, and
press the [SET] button.
SU
BUZZ
SELECT
SU
12:00
Ext. Signal Built-in Buzzer
Ext. Signal
Time
ON
9:00
9:00
12:00
17:30
MO TU WE TH FR
EXT. *OFF *ON
TIME TABLE
SIGNAL
PROGRAM
CHANGE SET
MO TU WE TH FR
17:30
Built-in Buzzer
ON
SA
SA
0:00
32