Setting The Time - Lathem 5000E Plus Guide De L'utilisateur

6. SETTING THE TIME

Example: Change the time from 10:08 to 10:09.
1
Press the [SELECT] button and position
the " " under the "TIME" mark.
At that moment, the "Hour" flashes.
(The flashing means it can be changed.)
Seconed
TIME
SELECT
Change the "Hour".
In case of the example, press the
[SET] button because the hour is not
to be changed.
TIME
SELECT
At that moment, the flashing changes
from "Hour" to "Minute".
3
Minute
Hour
CHANGE SET
CHANGE SET
2
Change the "Minute".
Press the [CHANGE] button to set at
"09". And then press the [SET] button.
TIME
SELECT
At that moment, the "Second" starts to
run from "00".
3
After you finish setting the time, press
the [SET] button once again.
SU MO TU
Now the time setting has been
completed. Replace the cover and
lock.
Important: If you do not complete Step
3, the Time Recorder will not print.
CHANGE SET
WE TH FR SA
6