Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Confirming the Time Table Program settings
To confirm the programs that have been set, press the [SELECT] button and position the " "
over the "TIME TABLE PROGRAM" mark. At that moment, the "Program No." flashes.
And then press the [CHANGE] button.
After you finish confirming the program, press the [SET] button 6 times.
Now the time table program setting has been completed. Replace the cover and lock.
Important: If you do not complete confirming the settings, the Time Recorder will not print.
Deleting the Time Table Program settings
Example: Deleting the "Program No.2".
1
To delete a program, make the
"Program No." flash, and press the
[CHANGE] button until the desired
program No. is displayed.
SU
BUZZ
SELECT
Press the [SET] button. At that
moment, the display changes to the
following figure.
SELECT
2
Press the [CHANGE] button to set at
" ".
37
SELECT
MO
TU
WE
TH
FR
EXT.
*OFF
*ON
TIME TABLE
SIGNAL
PROGRAM
CHANGE
SET
TIME TABLE
PROGRAM
CHANGE
SET
TIME TABLE
PROGRAM
CHANGE
SET
3
Press the [SET] button. At that
moment, the display changes to the
following figure.
SA
SELECT
4
After you finish deleting a program,
press the [SET] button once again.
Now the time table program setting
has been completed. Replace the cover
and lock.
Important: If you do not complete Step
4, the Time Recorder will not print.
TIME TABLE
PROGRAM
CHANGE
SET
SU
MO
TU
WE
TH
FR
SA
36
Publicité
Chapitres
Table des Matières
Dépannage
