Lathem 5000E Plus Guide De L'utilisateur page 38

1
Press the [SELECT] button and position
the " " over the "TIME TABLE
PROGRAM" mark.
At that moment, the flashing digit
indicates the "Program No.".
(The flashing means it can be changed.)
2
Setting program No. 1
(1) Set the "Day of the week".
Press the [SET] button. At that moment,
the flashing changes from the "Program
No." to the "Day of the week".
In case of example, press the [CHANGE]
button to set at "9". And then press the
[SET] button. At that moment, the
flashing changes from the "Day of the
week" to the "Action".
Day of the week
1. Monday only
2. Tuesday only
3. Wednesday only
4. Thursday only
5. Friday only
(2)Set the "Action".
Press the [CHANGE] button to set at
"3". And then press the [SET] button.
SELECT
Action
Special mark "*" ON
1.
Special mark "*" OFF
2.
Ext. Signal ON
3.
Built-in Buzzer ON
4.
• The "Ext. Signal" and the "Built-in Buzzer" are available only when "Optional Board"
is connected to the time recorder.
33
TIME TABLE
PROGRAM
CHANGE SET
Day of the
Program
week
No.
SELECT CHANGE
SELECT CHANGE
Day of the week
6. Saturday only
7. Sunday only
8. Monday to Friday
9. Monday to Saturday
10. Every day
At that moment, the display changes
to the following figure.
SU MO TU WE
BUZZ EXT. *OFF
SIGNAL
SELECT CHANGE
Selected Action
Action
TIME TABLE
PROGRAM
SET
TIME TABLE
PROGRAM
SET
Selected
Day of the week
TH FR SA
*ON
TIME TABLE
PROGRAM
SET
34