Setting The Initial Number - Lathem 5000E Plus Guide De L'utilisateur

17. SETTING THE INITIAL NUMBER

Example: Setting the initial number to "123". Refer to "16. SETTING THE NUMBER".
1
Press the [SELECT] button and position
the " " next to the "INITIAL
NUMBER" mark.
At that moment, the flashing "
indicates the 1st digit of the initial
number.
(The flashing means it can be changed.)
SELECT
2
Set the "Initial Number".
In case of the example, press the
[CHANGE] button to set at "1". And
then press the [SET] button.
SELECT
At that moment, the 2nd digit of
"Initial Number" appears next to "1"
(the 1st digit).
SELECT
29
The1st
digit
INITIAL
NUMBER
CHANGE SET
INITIAL
NUMBER
CHANGE SET
The 2nd
The 1st
digit
INITIAL
digit
NUMBER
CHANGE SET
3
Set the correct numbers in the same
manner as Step 2. And then press the
[SET] button.
"
SELECT
Note: Up to 8 digits can be set,
however the number of digits for
"Initial Number" depends on now you
set at the "Number".
Note: When the "Number Digit" has
been set at "3", "
next to "3" (the 3rd digit).
4
After you finish setting the initial
number, press the [SET] button once
again.
SU MO
Now the initial number setting has
been completed. Replace the cover and
lock.
Important: If you do not complete Step
4, the Time Recorder will not print.
INITIAL
NUMBER
CHANGE SET
" doesn't appear
TU WE TH FR SA
30