Setting The Password; Registering The Password - Lathem 5000E Plus Guide De L'utilisateur

21. SETTING THE PASSWORD

When the password is set, you are asked to enter it. If the password you entered does not
coincide with the setting, you cannot change the setting values.
You may set a password by any 4-digit number from 0001 to 9998.
Note : Number "0000" and "9999" cannot be used as a password.
Please reset all settings when you forgot the passward. Refer to the "22. RESETTING".

Registering the Password

Example: Set the password "1234".
1
Press the [SELECT] button and position
the " " over the "PASSWORD" mark.
At the moment, the first two digits flash.
(The flashing means it can be changed.)
PASSWORD
SELECT
Change the first two digits.
In case of the example, press the
[CHANGE] button to set at "12". And
then press the [SET] button.
PASSWORD
SELECT
At that moment, the flashing changes
to the last two digits.
41
CHANGE SET
CHANGE SET
2
Change the last two digits.
In case of the example, press the
[CHANGE] button to set at "34". And
then press the [SET] button.
PASSWORD
SELECT
3
After you finish registering the password,
press the [SET] button once again.
SU MO TU
Now the password registering has
been completed. Replace the cover
and lock.
Important: If you do not complete Step
3, the Time Recorder will not print.
CHANGE SET
WE TH FR SA
40