Setting The Slave Clock - Lathem 5000E Plus Guide De L'utilisateur

20. SETTING THE SLAVE CLOCK

In this setup, you can select the Slave Clock.
Note:For this feature to be functional, the optional board must be installed in the Time
Recorder.
Clock Options
0.
Disabled
1. Slave Clock
Setting the Slave Clock
Example: Set the Slave Clock and 60-second reversal.
1
Press the [SELECT] button and position
the " " over the "SLAVE CLOCK"
mark. At that moment, the flashing digit
indicates "Clock Options".
(The flashing means it can be changed.)
Clock Options
SELECT
Set the "Clock Options".
In case of the example, press the
[CHANGE] button to set at "1".
And then press the [SET] button.
At that moment, the flashing changes
from the "Clock Options" to "Signal
Options".
SELECT
39
SLAVE CLOCK
CHANGE SET
Signal Options
SLAVE CLOCK
CHANGE SET
Signal Options (for Slave Clock)
30-second reversal
30.
60-second reversal
60.
59. 59-minute impulse
2
Set the "Signal Options".
In case of the example, press the
[CHANGE] button to set at "60".
And then press the [SET] button.
SLAVE CLOCK
SELECT
3
After you finish setting the slave
clock, press the [SET] button once
again.
SU MO TU
Now the slave clock setting has been
completed. Replace the cover and
lock.
Important: If you do not complete Step
3, the Time Recorder will not print.
CHANGE SET
WE TH FR SA
38