Winix HR1000 Mode D'emploi page 7

INSTALLING THE FILTERS
Replace the front panel by first
⑤
inserting the latch at the bottom
edge into the base of the unit, then
rotate the panel upward toward the
top of the unit until it magnetically
snaps closed.
When to service and replace filters:
⑥
Filter
1 Pre-filter
2 CD Carbon filter
3 Anti-microbial True
HEPA filter
 Intervals between filter replacement may vary depending on environment.
 For optimal use, Pre-filter can be cleaned every 14 days which can extend the life of
other filters.
▶ Refer to pages 14-18 for detailed information on filter care and
English
Indicator Light
how to replace them.
this unit
is compatible
with this
filter
ITEM: 117130
When to
Clean once
none
every 14 days
Can NOT be
J
FILTER
| Set up
Installation
When to
service
Permanent
Lasts up to
WASHED
12 months
replace
7
HR 1000