Leica Rugby 260SG Manuel De L'utilisateur page 41

POWER button
STANDBY button
Rugby 260SG / 270SG / 280DG, Accessories
The POWER button turns on the remote. When pressed it will communicate
with the Rugby to receive current information.
Once communication is established, the remote can be used to change
grade and setup parameters on the Rugby 280DG.
Press and hold the POWER button for 1.5 seconds to turn the remote off.
If the remote is not within range or otherwise loses commu-
nication, the lost communication screen will be displayed.

It is important to achieve the specified distances that the remote is used
within the "line of sight" of the Rugby.
The STANDBY button will cause the Rugby to go into standby mode for up
to 16 hours. After this time the Rugby will shut off and can only be turned
on again at the Rugby.
In standby mode, a sleeping Rugby is shown.
Pressing any button on the Rugby or on the remote (except
the POWER button on the remote) will cause the Rugby to
return to normal operation.
39