Leica Rugby 260SG Manuel De L'utilisateur page 28

Rugby 260SG / 270SG / 280DG, Operation
Using lay down
mode
In automatic mode the vertical axis will self-level automatically, whereas this is not
the case in manual mode.
The cross-axis can be adjusted left or right for layout applications.
If required, press the STAR button to change the setup options.
To activate lay down mode, put the Rugby into lay down posi-
tion. The screen to the right is shown. Only in manual mode
symbol a) is shown.
Set up the Rugby in the lay down position so that the laser
beam is positioned over the first reference point.
Press the UP and DOWN buttons at the same time, and the beam will rotate clock-
wise to your second reference point on the right. (Press these two buttons two more
times if your reference point is on the left side of the laser.)
In case that any setup option needs to be changed like head speed or scan mode,
press the STAR button to enter the setup menu.
To align the cross-axis (or plumb beam) to a second reference point, press the X/Y
button to select the cross-axis then press the UP or DOWN button to move the beam
left or right.
26
a