Leica Rugby 260SG Manuel De L'utilisateur page 36

Rugby 260SG / 270SG / 280DG, Checking Lay Down Accuracy
Lay down accuracy
adjustment

1. With the Rugby still in lay down position, turn the Rugby
off, then enter adjustment mode in the same way as
described for adjusting level accuracy.
2. Have the rotating beam scan the plumb line then use the UP and DOWN buttons
to align the beam vertically.

Using the MR Remote Control will allow adjustment to be done remotely
while closely monitoring the beam at the plumb line.
3. If desired adjustment is achieved, press the STAR button on the Rugby to accept
and store the number on the display.
• After adjustment, always check your work.
• Always check accuracy prior to critical applications.
• Pressing the POWER button at any time before completing the procedure will
cancel the adjustment and revert the accuracy to previously saved information.
34