Leica Rugby 260SG Manuel De L'utilisateur page 21

Beam masking
Lock function
Rugby 260SG / 270SG / 280DG, Setup
In manual mode the X-axis slope can be changed by pressing
the X/Y button first and then the UP button / DOWN button
to change the amount.
The amount of change is not visible on the display.
Electronic beam masking allows for turning off the laser beam in specific sectors to
prevent interference with other operations on the job.
Using the setup menu the beam can be turned off in two or three selected sectors.
The beam masked sectors will appear dark.
The lock function is used to prevent the Rugby against
unwanted changes. When the lock function is activated, the
Rugby remains operational, but no settings can be changed.
The lock status is shown in the status line.
Once activated and pushing a button, the lock symbol will be
shown for three seconds.
To turn OFF the lock function, press the STAR button to
return to the setup screen and disable the lock.
19