Key To Symbols; Symbols On The Machine; Explanation Of Warning Levels - Husqvarna DC 6000 Manuel D'utilisation

Symbols on the mac hine
W ARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious
or fatal injury to the operator or
others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Wear personal protective
equipment. See instructions under
the heading "Personal protective
equipment".
WARNING! Dust forms when
grinding, which can cause injuries if
inhaled. Use an approved breathing
mask. Always provide for good
ventilation.
En vironmental marking. Symbols
on the product or its packaging
indicate that this product cannot be
handled as domestic waste.
By ensuring that this product is taken
care of correctly, you can help to
counteract the potential negative
impact on the environment and
people that can otherwise result
through the incorrect waste
management of this product.
For more detailed information about recycling this
product, contact your municipality, your domestic waste
service or the shop from where you purchased the
product.
Other symbols/decals on the mac hine refer to special
certification requirements for certain markets.
2 – English
All manuals and user guides at all-guides.com
KEY T O SYMBOLS
Explanation of warning le vels
The w arnings are graded in three levels.
W ARNING!
CAUTION!
NOTICE!
NO TICE! Used if there is a risk of damage to materials
or the machine if the instructions in the manual are not
followed.
W ARNING! Used if there is a risk of
!
serious injury or death for the operator
or damage to the surroundings if the
instructions in the manual are not
followed.
CA UTION! Used if there is a risk of injury
!
to the operator or damage to the
surroundings if the instructions in the
manual are not followed.