Symbols On The Product; Safety Definitions; Rating Plate; Product Liability - Husqvarna ER 105 Manuel D'utilisation

9. Bearing cover
10. Bearing
11. Bearing bracket
12. Operator's manual

13. Rating plate

Symbols on the product

WARNING: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
Read the manual carefully and make sure
that you understand the instructions before
you use the product.
Use approved protective gloves.
Use hearing protection.
Double insulation.
The product or package of the product is not
domestic waste.
Protection against solid objects that are
larger than 1mm and water splashing from
all directions.
This product is in compliance with applicable
EC directives.
Note: Other symbols/decals on the product refer to
special certification requirements for some markets.

Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
1586 - 001 - 26.03.2021
Rating plate
1
2
3
4
5
1. Product type
2. Serial number
3. Voltage, V
4. Motor speed, rpm
5. Year of manufacture
6. Current, A
7. Frequency, Hz
8. Rated power, W
9. Phase
10. Land of manufacture
11. Manufacturer

Product liability

As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.

Safety

CAUTION: Used if there is a risk of damage
to the product, other materials or the
adjacent area if the instructions in the
manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.
6 7 8 9
11
10
3