Technical Information; General Description - Dustbane Hurricane 400 Manuel D'opération

TECHNICAL INFORMATION

General description

This machine is a scrubber dryer for washing and drying flat, horizontal, smooth or moderately rough, even and obstacle free
floors in civil and industrial premises.
The scrubber dryer spreads a solution of water and detergent in the correct concentration on the floor and then scrubs it to
remove the dirt. By carefully choosing the detergent and brushes (or abrasive disks) from the wide range of accessories available,
the machine can be adapted to a wide range of combinations of types of floor and dirt.
A suction system incorporated in the machine dries the floor after washing by means of the low pressure generated in the dirty
water tank by the suction motor. The squeegee connected to the tank collects the dirty water.
The machine is moved forward by:
Non-Traction drive: the auto-scrubber is provided with a special mechanical drive device which exploits
the friction between the brush and the floor to generate a forward movement (for further details, see paragraph 6.7).
Traction drive: the auto-scrubber is moved forward by means of a special electromechanical drive device.
Legend
The main parts of the machine are as follows:
• Control panel
• Recovery tank – collects the dirty water picked up from the floor after washing [Ref. 2]
• Head lift pedal – raises the brush head during transport [Ref. 3]
• Head assembly – holds the brushes / pads [Ref. 4]
• Brushes / pads – distribute the chemical solution on the floor and removes the dirt [Ref. 5]
• Squeegee assembly – wipes and dries the floor by collecting the water [Ref. 6]
• Solution tank – contains and transports the mixture of clean water and chemical solution [Ref. 7]
4
Operations Manual
Fig./Abb./ 2
图
Hurricane 400 XTT / Hurricane 400 XTT – Traction
Fig./Abb. 1
图
Fig./Abb./ 3
图