Product Overview; Intended Use - Philips 21075A Manuel D'utilisation

Product Overview

Intended Use

Philips autoclavable temperature probes are reusable devices used to
continuously monitor patient body temperature during clinical care. The
probes are available in several configurations that can be applied to the
patient orally, rectally, or attached to the skin. (Note: core temperature
readings are normally different than skin temperature readings in the same
patient.)
These probes should be applied to a patient only under direct supervision
of a licensed physician or healthcare provider, and connected only to
compatible patient monitors (see Compatibility below). The probes are
shipped non-sterile. It is recommended that each probe be cleaned,
disinfected and inspected for damage before use.
Measurement Range and Accuracy
Temperature accuracy of these probes at the site of measurement is:
• + 0.2°C within the temperature range of 0°C to 60°C
• + 0.1°C within the temperature range of 25°C to 45°C.
Compatibility
Six temperature probe models are available (see table below). All are
compatible with patient monitors that use 400-Series technology.
Probe Model No.
21075A
21076A
21078A
989803162621
989803162631
989803162641
Autoclavable Temperature Probes
Patient Application
12 Fr Esophageal/Rectal
10 Fr Esophageal/Rectal
Skin
12 Fr Esophageal/Rectal
10 Fr Esophageal/Rectal
Skin
Length
10 ft
10 ft
10 ft
10 ft
10 ft
1/4-inch phone plug
plugs into non-Philips monitors
10 ft
1
Probe Connector
2-pin plugs
into Philips
monitors