Cleaning The Thermal Head - Epson TM-S9000MJ Manuel De L'utilisateur

Masquer les pouces Voir aussi pour TM-S9000MJ:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
English

Cleaning the Thermal Head

Epson recommends cleaning the thermal head periodically (generally every 3 months) to
maintain thermal printing quality.
CAUTION:
The thermal head can be very hot after printing. Be careful not to touch it, and let it cool before
you clean it.
Do not damage the thermal head by touching it with your fingers or any hard object.
Turn off the product, open the roll paper cover, and clean the thermal elements of the
thermal head with a cotton swab moistened with an alcohol solvent (ethanol or IPA). (See
illustration N.)
Cleaning the MICR Head
When the MICR head becomes dirty, the product cannot read the magnetic ink characters
normally.
Clean the MICR head every 6 months or every 100,000 passes by setting the following
cleaning sheet in the same way as cut sheet paper. (See "Inserting Cut Sheet Paper" on
page 18.)
KIC Team, Inc.
Waffletechnology
Epson Check Scanner Cleaning Kit (model:KWEPS-KCS2)
Note:
Use a cleaning sheet only one time; then discard it.
It is recommended to clean the MICR head once per week or once every 2,000 sheets for good
reading results.
It is recommended to clean the scanner after cleaning the MICR head.
Cleaning the Scanner
If the glass of the scanner gets soiled from ink or paper dust, the quality of scanned data
may deteriorate. Clean the glass every 6 months or every 100,000 passes by following the
steps below.
Note:
It is recommended to clean the scanner once per week or once every 2,000 sheets for good
reading results.
1.
Pull the scanner cover open lever and open the scanner cover by pulling it outward.
(See illustration O.)
Lightly wipe 2 parts of glass areas (see illustration P) with a soft, dry cloth.
2.
CAUTION:
Do not use synthetic detergent, benzine, water, or other liquid for cleaning. Doing so may
result in a stain.
When the glass of the scanner is smeared with oil, grease or other unremovable substance,
wipe it with a cloth lightly dipped in alcohol. However, never apply any liquid directly to the
glass of the scanner.
3.
Close the scanner cover firmly until it clicks in place.
20 TM-S9000MJ User's Manual
®
MICR cleaning card (model:CS1B15WS)

Publicité

Table des Matières
loading

Table des Matières