Connecting The Ac Adapter - Epson TM-S9000MJ Manuel De L'utilisateur

Masquer les pouces Voir aussi pour TM-S9000MJ:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23

Connecting the AC Adapter

See illustration C and follow the steps below to connect the AC adapter.
CAUTION:
Be sure to use the specified AC adapter [PS-180 (Model: M159B)]. Connection to an improper
power source may cause fire or shock.
1.
Connect the AC cable to the AC adapter.
2.
Connect the DC cable of the AC adapter to the power supply connector on the
product.
3.
Insert the AC cable plug into a socket.
Tuning on/off the Printer
To turn on the product, press the power button on the front side of the product.
To turn off the product, press the power button for 3 seconds or more until
LED goes off.
CAUTION:
When turning off the product, make sure the AC cable is connected to the product and a wall
socket, and always use the power button.
Installing and Replacing the Roll Paper
Note:
Be sure to use the specified roll paper.
1.
Put your finger under the left side of the roll paper cover and pull it up to open it. (See
illustration D.)
2.
Remove the used roll paper core, if there is one, and insert the roll paper in the correct
direction. (See illustration E.)
3.
Pull out some paper, and close the roll paper cover. (See illustration F.)
When the power is on, the roll paper is automatically cut.
Installing and Replacing the Ink Cartridge
Notes on Using the Ink Cartridge
Read the manual included with the ink cartridge before use.
When the ink cartridge is installed for the first time, the product uses ink to prepare
for printing (ink charging).
Cartridge yields vary based on such usage environment and conditions.
To insure print quality, some ink remains in the cartridge after the Ink LED comes on.
Be sure to use genuine Epson ink cartridge (SJIC18(K)).
Do not touch the green IC chip on the side of the ink cartridge.
Do not remove the ink cartridge except when replacing it with a new one.
Do not open the ink cartridge until you are ready to install it.
After installing an ink cartridge, use it up within 6 months.
Use the ink cartridge before the expiration date printed on its package and on the ink
cartridge itself.
Do not puncture the convex part of the bottom of the ink cartridge or remove the
transparent film on the bottom of the ink cartridge.
TM-S9000MJ User's Manual 15
English
(Power)

Publicité

Table des Matières
loading

Table des Matières