Preparing The Reservoir; Getting Started - Waterpik WP-250 Mode D'emploi

Plug the cord into an electrical outlet. If the outlet is
controlled by a wall switch, be sure it is turned on.

Preparing the Reservoir

reservoir over the base and press down firmly.
Fill
Replace
O
I
2
1
3
Inserting and Removing Tips
Insert tip into the center of the Water Flosser handle. The
colored ring will be flush with the top of the handle if the
tip is correctly locked into place. Gently pull on tip to
towards the top of the handle and lift tip from handle.
Tip Insertion
Insert
NO
Gap

GETTING STARTED

Tip Removal
Eject
Slide
Button
Up
9