Télécharger Imprimer la page

ROCK EXOTICA ARIZONA VORTEX Mode D'emploi page 4

Publicité

INTRODUCTION
Congratulations on your purchase of the Vortex. The Vortex
is the most versatile, state of the art and functional multipod
available to the rope rigging industries. With proper study
and practical training, you can construct the Vortex to ac-
complish your rigging needs in any number of environments
from industry to wilderness.
SPECILIZED TRAINING AND EXPERIENCE IN TECHNICAL
RIGGING IS ABSOLUTLEY ESSENTIAL FOR SAFE USE.
THIS MANUAL IS NOT A SUBSTITUTE FOR TRAINING. THIS
MANUAL IS A REFERENCE FOR ASSEMBLY AND BASIC
OPERATION OF THE AZ VORTEX.
APPLICATION
The Vortex is ideal for a wide range of applications, from
access and egress to confined spaces, to the negotiation of
complex edges in wilderness environments. The Vortex is the
multipod of choice for professionals within rescue, indus-
trial rope access, construction, military and entertainment
rigging.
DESIGN PRINCIPLES
The Vortex multipod is more than a typical tripod, in part
due to the enhanced flexibility of the two piece head set. The
A-Frame Head has been designed to give the most optimal
angle between the legs, while the Gin Pole Head can hinge
to allow precise positioning of the third leg. The multipod
can be assembled into a three-leg frame using both heads or
they can be used individually to create an A-Frame or a Gin
Pole.
The legs of the Vortex are made up of two styles. The Inner
Legs (shiny, anodized finish) are one constant diameter with
adjustment pin holes at 150 mm (5.9") increments along the
leg. The Inner Leg is sized to connect to the heads, the feet
and the Outer Legs.
The Outer Legs (matte gray) have a coupler on one end that
enables multiple Outer Legs to join together. The coupler is
also sized to connect to the heads and the feet (See page 9,
10 & 11).
The head units are designed on a rigging plate principle
allowing attachment of multiple connectors as well as direct
tie-in of rope, cord, and webbing. Ball-lock pins are also in-
cluded for attachment of the head sheave and other compat-
ible rigging components (See to page 7).
Regarding the re-sale of this product:
If re-sold outside the original country of destination, CE guidelines
require the re-seller of the Vortex to provide instructions for use,
maintenance, periodic examination and for repair in the language of
the country in which this product is to be used.
4 – VORTEX USER MANUAL
®
E X P E R T
U S E
O N L Y
CARE & USE
Service Life: The maximum service life of the Vortex metal
products is not defined; however, the lifespan may be
reduced by frequency of use, adverse loading, incompatible
environment, incorrect use or inappropriate storage and
handling.
Inspection frequency: The Vortex must undergo a detailed
periodic inspection by a competent person at least every 12
months. The frequency of inspection may be more often de-
pending on the nature of use and the environment in which
it is used. If you have any doubts or questions about the
safety or suitability of the Vortex, or any part thereof, remove
the product from service and contact Rock Exotica.
In addition to the detailed periodic inspection, the Vortex
must be inspected before and after each use. Ideally, users
of the Vortex will be trained to perform this function. The in-
spection should include a tactile, visual and functional check
of all Vortex components. Refer to the inspection criteria on
page 30 for further information on this inspection.
Record keeping: A record of inspections should be kept and
made available in accordance with applicable laws, codes of
practice and policies. See page 31 for a sample inspection
record.
Preventive Maintenance / Storage: To ensure maximum
longevity of the Vortex, prevent contact with salt water,
chemicals and other potentially harmful substances. Avoid
exposing the Vortex to harsh environments wherever practi-
cal.
Wash all components with fresh water after use to remove
dirt, grime, salt and other chemicals or contaminants. Dry,
or allow to dry away from direct heat. Store the Vortex
in a clean dry place away from extremes of temperature
and avoid chemical exposure. Small burs may be lightly
smoothed with a fine abrasive cloth.
Rock Exotica LLC
P.O. Box 160470
Freeport Center, E-16
Clearfield, UT 84016
USA
801 728-0630
TOLL FREE: 844-651-2422
VX2500 08/2018 B
Patented
Made in the USA using foreign and
domestic materials
WARNING: This product can expose you to chemicals including
nickel acetate, which is known to the State of California to cause
cancer. For information go to WWW.P65Warnings.ca.gov
ARIZONA VORTEX
USER'S GUIDE

Publicité

loading