Canadian Spa Halifax Manuel D'instructions page 23

CHANGE A GRATE FILTER ON A CANADIAN SPA TUB
CHANGE A WIER STYLE SKIMMER FILTER
1. Unscrew Face Place with
screw driver
3. Slide Face Plate Up
CHANGE A NEW STYLE FILTER ON A CANADIAN SPA TUB
TIP: CLEANING YOUR FILTER
It is advisable to clean your hot tub filters every 2 or 3 weeks.
• Turn off spa power
• Remove the cartridge from the filter housing and use a garden hose or
a tap to wash down the filter. Rinse until all dirt and debris have been
removed.
• Dissolve 250 gms of Canadian Spa Filter Free in 10 litres of luke warm
water (one capful holds approximately 30 gms).
• USE A PLASTIC PAIL AND MIX UNTIL THE SOLUTION TURNS RED
(ALWAYS READ THE LABEL). Soak the filter cartridge for at least 1 hour
(overnight is recommended).
• Rinse the cartridge again after cleaning to remove any traces of cleaning
solution.
Step 1. Remove the two screw cap
covers
Step 2. Undo the two screws to
release filter lid
2. Remove Screw
4. Skimmer Exposed
Step 1. Lift off lid on filter basket
5. Fold Weir Forward
7 Unscrew filter and lift out
8. Clean or exchange filter
• Always dry the filters before inserting them back into
your hot tub. This ensures that the filters perform to
their best and last longer. Let them dry naturally. It is
also a good idea to keep a spare set of filters.
• Do not run spa without filters. To order more filters
visit our website: www.canadianspacompany.com
23
Step 3. Open the filter lid to
access the filter chamber
Step 4. Unscrew the two filters and
replace with the new filters and
rescrew into position
6 Slide basket Out
Step 2. Insert filters and close lid