Fm Radio Operation - SOUNDMASTER SCD1500 Mode D'emploi

1. Set the "FUNCTION" switch (16) to DAB+/FM position
2. Set the "BAND" switch (17) to FM mode.
3. Rotate the "VOLUME" control (1) to adjust the desired listening level.
Note : For best reception, fully extent the FM telescopic antenna to receive FM station.
Auto Scan
1. In FM mode, press the "FULL SCAN" button (2) to start searching the forward available
FM station. Press and hold the "FULL SCAN" button (2) for 3 seconds to start searching
the backward available FM station
2. The search operation simply finds stations with strong signals. Stations with weak signal
can only be tuned in manually.
Manual tune
Rotate "TUNING/ENTER" button (9) to unit will skip 0.05 MHz in the direction of skip.
To Store the FM Stations in the Memory
1. In FM mode, select the FM station
2. Press and hold the "PROGRAM/PRESET/10+" button (7) ( for about 3 seconds, the
display will show the current FM station and P# (where # is the preset station number)
will flash
3. Rotate "TUNING/ENTER" button (9) to select the desired preset station number and then
press TUNING/ENTER button (9) to confirm storing that station in the memory.
To Recall the Stored FM Station
1. In FM mode, press the "PROGRAM/PRESET/10+" button (7), the display will show the
current FM station and P# (where # is the current preset station number)
2. Rotate "TUNING/ENTER" button (9) to select the desired preset station number and
then press "TUNING/ENTER" button (9) to confirm storing that station in the memory.
FM MONO/ AUTO Mode
In FM mode, press the "TUNING/ENTER" button (9) to select the MONO mode or AUTO mode.
FM Station Information
Press "INFO" button (3) to display the information of the current FM station in the sequence
below :
Signal Strength  This shows a slide bar to indicate the signal strength, the stronger the
signal, the longer the bar will be from left to right.

Date and Time  This displays the current date and time.

Frequency  This displays the frequency of the current station.

Audio Type  This displays if the audio being received is in mono or auto (stereo) mode.

Scrolling Text  This is a scrolling message giving real-time information, e.g. song titles, news
headlines,etc.

Programme Type  This describes the "style" or "genre" of the programme that is broadcasting.

FM RADIO OPERATION

5
SCD1500 / English Instruction Manual