SOUNDMASTER SCD1500 Mode D'emploi page 12

Controls
ʺBAND Switch"
ʺFULL SCAN"
ʺINFO"
ʺMENUʺ
ʺPROGRAM/PRESETʺ
ʺENTERʺ
ʺTUNINGʺ
ʺVOLUMEʺ
AC OPERATION
Before operation, please make sure that the VOLTAGE mentioned on the unit is same as the
voltage of your local area. Unravel the AC power cord, insert one end into the AC socket on the
set and the other end into a standard AC outlet..
ATTENTION
1. Do not plug or unplug the power cable while you have wet hands;
2. If you plan not to use the unit for a long time, disconnect the power cable from the wall outlet;
3. When disconnecting the power cord from the wall outlet, do not pull on the cord in order to
avoid shock risks caused by damaged cable.
BATTERY OPERATION
Disconnect the AC Cord Set completely. Open the Battery Compartment door (19) and insert
6 pieces LR14 / UM-2 "C" size batteries into the battery compartment with battery polarity as
shown inside the battery compartment.
QUICK QUIDE
DAB+
Select DAB+ or FM mode
Press to perform a full scan
Press to toggle through various station information
Press to for Menu option
Press and hold to set a preset station
Press to recall a preset
Press to confirm the option
Rotate clock wise:
Go to the next station/option
Rotate anti- clock wise:
Go to the previous station/option
Rotate clock wise: increase the volume level
Rotate anti- clock wise: decrease the volume level
SCD1500 / English Instruction Manual
Mode
Press to forward scan for next
available station
Press and hold 3 seconds to
backwards scan for the next
available station
Rotate clock wise: Increase
frequency by one step (0.05MHz)
Rotate anti- clock wise: Decrease
frequency by one step (0.05MHz)
Press to toggle Mono/Stereo (Auto)
2
FM