Art-Net™ Or Kling-Net, And Dmx Linking - Chauvet Professional Next NXT-1 Manuel D'utilisation

Setup And Installation
Art-Net™ or Kling-Net, and DMX Linking
Art-Net™ and Kling-Net signals pass through Neutrik® etherCON® cables and the Neutrik®
etherCON® ports in the back of the product are auto-sensing, so they can be either an input
port or an output port.
DMX signal passes through DMX cables. The Next™ NXT-1 has both 3- and 5-pin DMX In
ports and DMX Out ports. These ports are not auto-sensing like the Neutrik® etherCON®
ports. They can be only input or output. However, the 3-pin input port works with the 5-pin
output port and vice versa.
The diagram below shows Art-Net™ or Kling-Net, and DMX signal linking for three Next™
NXT-1.
Neutrik®
etherCON® Cable
DMX Cable
Next™ NXT-1 User Manual Rev. 1 Page 15 of 15