Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4. Configuration And Operation
The Next™ NXT-1 is configured through the control panel and operated with a controller. The
type of controller and configuration of the control system along with the intended use of the
Next™ NXT-1 drive the configuration settings.
The Next™ NXT-1 responds to DMX signals. The DMX signals come into the Next™ NXT-1
through the DMX In port, the Neutrik® etherCON® port, or both, depending on the control
system environment.
Control system environments range from simple DMX only environments with a single lighting
controller to complex multi-protocol system with media servers and lighting controllers.
Control Panel
The control panel is on the front of the Next™ NXT-1 and includes an LCD display and four
buttons for moving around the menu structure.
Button
<MENU/ESC>
<UP>
<DOWN>
<ENTER>
Menu Map
The menu map is all the options and settings available in the menu structure.
Main Menu
DMX Functions
Motor Setup
Next™ NXT-1 User Manual Rev. 1
Scrolls through the first level of options, or exits from the current menu or function
Navigates upward through the menu list or increases the numeric value when in
a function
Navigates downward through the menu list or decreases the numeric value when
in a function
Enables the currently displayed menu or sets the currently selected value in to
the current function
Functions And Values
DMX Address
DMX Channels
Pan Inverse
Tilt Inverse
Pan
Motor Offset
Tilt
Function
1–512
DMX address.
< 9CH>
< 10CH>
< 13CH>
< 23CH>
DMX personality.
< 81CH>
<106CH>
<119CH>
No/Yes
Invert pan
No/Yes
Inverse tilt
0–255
Offset pan motor
0–255
Offset tilt motor
Configuration And Operation
Description
Page 17 of 17
Publicité
Table des Matières
