Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Technical Information
5. Technical Information
Maintenance
Page 46 of 46
To maintain optimum performance and minimize wear, you should clean this
product frequently. Usage and environment are contributing factors in determining
the cleaning frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces light
output performance and can cause overheating. This can lead to reduced light
source life and increased mechanical wear.
To clean your product:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust
collected on the external vents.
4. Clean all external surfaces with a mild solution of non-ammonia glass cleaner or
isopropyl alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning
tissue.
6. Wipe any dirt or grime to the outside edges of the lens surface.
7. Gently polish the lens surfaces until they are free of haze and lint.
Always dry the external surfaces thoroughly and carefully after cleaning them.
Do not spin the cooling fans while blowing compressed air into them.
Next™ NXT-1 User Manual Rev. 1
Publicité
Table des Matières
