Operating Conditions - Panasonic CS-Z20VKEW Comment Utiliser L'appareil

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To maximise comfort while sleeping
This operation provides you with a comfortable environment while sleeping. It will
automatically adjust the sleep pattern temperature during the activation period. The indoor
unit indicator will dim when this operation is activated. This is not applicable if the indicator
brightness has been manually dimmed.
SLEEP
This operation is incorporated with the activation
timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9 hours).
To set the timer
2 sets of ON and OFF timers are available to turn ON or OFF the unit at different preset time.
1
2
TIMER
ON
TIMER
OFF
1
Select ON or OFF
timer
• Each time pressed:
Cancel
2
Set the time
3
Confi rm

Operating conditions

Use this air conditioner in the temperature range indicated in the table.
Temperature °C (°F)
Max.
COOL
Min.
Max.
HEAT
Min.
DBT: Dry bulb temperature, WBT: Wet bulb temperature
*
1
CU-Z20VKE, CU-Z25VKE, CU-Z35VKE, CU-Z42VKE, CU-Z50VKE, CU-Z71VKE
*
2
CU-3E18PBE, CU-4E23PBE, CU-4E27PBE, CU-5E34PBE, CU-2E12SBE, CU-2E15SBE, CU-2E18SBE, CU-3E23SBE,
CU-2Z35TBE, CU-2Z41TBE, CU-2Z50TBE, CU-3Z52TBE, CU-3Z68TBE, CU-4Z68TBE, CU-4Z80TBE, CU-5Z90TBE
Note
,
• Can be activated in all modes and can be
cancelled by pressing the respective button again.
(Cancel)
3
Example:
OFF at 22:00
TIMER
OFF
2
SET
Indoor
DBT
WBT
32 (89.6)
23 (73.4)
16 (60.8)
11 (51.8)
30 (86.0)
-
16 (60.8)
-
SLEEP
,
See "To learn more..." for details.
• This operation can be set together with timer.
Sleep operation has the priority over OFF
timer.
• This operation can be cancelled by pressing
the respective button until the sleep timer
reaches 0.0h.
• To cancel ON or OFF timer, press
or
to select respective
TIMER
OFF
press
.
CANCEL
• If timer is cancelled manually or due to
power failure, you can restore the timer
again by pressing
respective
or
• The nearest timer setting will be displayed
and will activate in sequence.
• Timer operation is based on the clock set
in the remote control and repeats daily
once set. For clock setting, please refer to
Quick Guide.
Single split outdoor unit
DBT
WBT
43 (109.4)
26 (78.8)
-10 (14.0)
-
24 (75.2)
18 (64.4)
-15 (5.0)
-16 (3.2)
• Cannot be selected at the same time.
• Cannot be activated during MILD DRY.
TIMER
or
or
to select
TIMER
TIMER
ON
OFF
then press
.
SET
*
1
Multi split outdoor unit
DBT
WBT
46 (114.8)
26 (78.8)
-10 (14.0)
24 (75.2)
18 (64.4)
-15 (5.0)
-16 (3.2)
ON
then
*
2
-
19

Publicité

Table des Matières
loading

Table des Matières