Maintenance - Ego Power+ HT2400 Guide D'utilisation

SIDE CUTTING
When trimming the sides of the hedge, begin at the bottom and cut upwards
(see Fig. 8). Trim the side of a hedge so that it will be slight narrower at the top.
This shape will expose more of the hedge, resulting in a more uniform growth.
8

MAINTENANCE

WARNING:
other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
CLEANING
WARNING:
from the product when cleaning or performing any maintenance.
 Use a soft brush to remove debris from all air intakes and cutting blade.
 To remove pitch and other sticky residue, spray the blades with resin solvent.
Run the motor briefly so that the solvent is event distributed.
 Wipe the surface with a dry cloth.
20
56V LITHIUM-ION CORDLESS HEDGE TRIMMER
When servicing, use only identical replacement parts. Use of any
To avoid serious personal injury, always remove the battery pack