Upgrade, Update, Specifications; Scanner Upgrade - Adding Capability - tecnotest EZ-SCAN 4000 Manuel D'utilisation


EZ-SCAN 4000 ___________________________________________________________________________
6.0 -

UPGRADE, UPDATE, SPECIFICATIONS

This section contains information about the following subjects:
•

Scanner Upgrade - Adding Capability

•
Scanner Update - Loading New Software Version.
•
System Information.
•
Set the Time Units for Capture Mode.
•
Technical Description of OBD-I and –II.
6.1 - Scanner Upgrade - Adding Capability
Upgrading the scanner involves enabling features in your scanner. If you have a GM,
FORD, Chrysler, or OBD-II scanner, you can add any of the other versions to your
scanner for a nominal charge. One of our Customer Service Representatives will step
you through the process. Do the following to UPGRADE your scanner:
•
Press CONFIG from the initial screen.
•
Use the and
ENTER.
•
Write down the Serial Number for your scanner software, then press ENTER.
•
Use the and
displayed, then press ENTER.
•
Write down the Seed Number that is displayed on the screen. The Seed Number is
used to generate a unique Upgrade Key for your scanner.
•
Call and tell the Customer Service Representative the vehicle application you want
to add. Will ask for your software serial number and seed number, then give you
your Upgrade Key.
•
Use the ,
scanner, then press ENTER. The scanner will display a System Activated screen.
•
Press ENTER or CONFIG to display the initial screen.
•
The Customer Service Representative will then arrange the purchase and delivery
of a new cable that corresponds to your upgrade.
56
keys to display 3-User Upgrade on the screen, then press
arrows until the vehicle application you want to add is
, and arrow keys to enter the new Upgrade Key into your
OPERATING INSTRUCTIONS